IN RGBW MULTICOLOR AND WHITE WITH PLUG-AND-PLAY DRL HEADLIGHT HARNESS. This item comes with a Bluetooth RGBW Controller which is an LED controller is required for operations, a Butyl headlamp sealant (one) which is used to reseal any headlamp after installing Diode Dynamics LED products to protect against moisture ingress, and a Plug-and Play DRL Headlight Harness to connect to the vehicle's DRL and parking signal. PLEASE VERIFY FITMENT WITH YOUR APPLICATION PRIOR TO PURCHASING.MESSAGE ME WITH ANY QUESTIONS PRIOR TO PURCHASING. Huge increase in brightness, even in direct sunlight. Direct replacement for factory boards. Smartphone control with optional Bluetooth Controller. Designed and manufactured in the USA.
By replacing the circuit board inside with Diode Dynamics LED circuit boards, you can add full multicolor functionality, to seriously make your ride stand out! This product is not just RGB, it is RGBW! That means there is an extra LED chip that is specifically white in color, right next to the standard red, green, and blue LEDs. By using an RGBW controller, you can activate and control the white chip independently of the colors.
This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals, so you can keep a clean, factory white appearance for everyday driving. At Diode Dynamics, we work directly from OEM data, and use a 3D scanner, to develop precise replacement boards with identical mounting points and shape. Just remove the original board, and ours will fit directly in place with correct alignment. You'll also see OEM design features, such as high-intensity automotive emitters, wire connectors, and serial numbers for quality assurance. Works correctly, with no surprises.
In 2014, Diode Dynamics was the first to make replacement multicolor circuit boards. Our goal is to make them work just like the factory system - except for the fact that you can change the color anytime you'd like! That means connecting to the factory DRL and running light signals for proper operation. This isn't as easy as it sounds - on the Toyota Tacoma, the vehicle's computer will shut off the parking light after 15-20 minutes if it doesn't see the power draw it expects. Many of our competitors skip the factory signals, instructing customers to connect power to the battery, and manually turn the LEDs off and on every time they're used.
To provide an upgrade without disabling the factory functions, our engineers tuned the drivers carefully to pull just the right amount of power from the factory system. Everything works perfectly, with no errors: there's no need to sacrifice factory function with Diode Dynamics products! Also available as an option for this kit is our new Plug-and-Play DRL Headlight Harness. This harness allows you to connect to the vehicle headlight harness and by-pass the Dual Input Module.Simply plug this harness inline between the vehicle harness and the headlight harness and then connect it to the controller. No need to tap the DRL and parking wires on the headlight harness!
Unlike strips or halos, replacement boards work in conjunction with factory optics in your headlight. Since the factory setup uses only one white chip, it can be difficult to align the light properly from all four replacement emitters (Red, Green, Blue, and White).To save cost, other brands often use low-cost generic chips, which cannot focus light properly. This creates odd appearances, as some sections are brighter than others, and mixed colors like yellow and purple don't match. Diode Dynamics uses high-intensity automotive emitters to direct light properly to the factory optic, and all designs are tested a number of times with small adjustments to make sure the setup is optimized. Even a 0.1mm change can make a big difference, and Diode Dynamics products are carefully tuned for maximum performance.
To drive the high-power LEDs safely, a constant-current, waterproof, inductive driver is included for each set. These drivers were designed to last the life of your vehicle, and have been subjected to advanced transient voltage testing. These tests replicate the electrical wear and tear experienced in automotive environments every time your alternator starts and stops, which is what kills less robust electronics over time. The entire kit is also tested for long-term operation from -40 to 185 degrees F, vibration, and corrosion.
All of these tests are completed to SAE/DOT standards, just like the factory components. What's included in the box.
Two (2) sets of LED boards, left and right. One (1) input wire pigtails with T-taps. Quantity : Pair (left and right). NOTE: These boards are not compatible with aftermarket (non-factory) headlamps. Years : 2016, 2017, 2018, 2019.
Electrical Compatibilit y: No electrical issues (tested and confirmed). DRL Function : Operates at full brightness for DRL. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Lighting & Lamps\Light Bulbs & LEDs".The seller is "great_deals_dfw" and is located in this country: US. This item can be shipped to United States.