2018 2020 Ford Mustang Multicolor Drl Led Boards (rgbw)

2018 2020 Ford Mustang Multicolor Drl Led Boards (rgbw)
2018 2020 Ford Mustang Multicolor Drl Led Boards (rgbw)
2018 2020 Ford Mustang Multicolor Drl Led Boards (rgbw)
2018 2020 Ford Mustang Multicolor Drl Led Boards (rgbw)
2018 2020 Ford Mustang Multicolor Drl Led Boards (rgbw)
2018 2020 Ford Mustang Multicolor Drl Led Boards (rgbw)

2018 2020 Ford Mustang Multicolor Drl Led Boards (rgbw)
IN RGBW Multicolor and White with bluet ooth RGBW Controller which is an LED controller is required for operations and Butyl headlamp sealant (one) which is used to reseal any headlamp after installing Diode Dynamics LED products to protect against moisture ingress. PLEASE VERIFY FITMENT WITH YOUR APPLICATION PRIOR TO PURCHASING. MESSAGE ME WITH ANY QUESTIONS PRIOR TO PURCHASING. The Mustang's factory headlamps are fitted with signature tribar DRLs.

By replacing the circuit boards inside with Diode Dynamics LED circuit boards, you can add full multicolor functionality, along with an optional amber sequencing turn signal mode, to seriously make your ride stand out! Your order includes two sets of LED boards, one for each side of the vehicle. To take it a step further, you can select the RGBWA boards, which add yet another set of LEDs, high-power amber emitters. Any time your turn signal is activated, they will sequence across.

The RGBWA drivers use a programmed integrated circuit to keep the timing exactly in sync with the factory tail lamp speed, for a unique feature that still flows well with factory styling. The blink rate on the Ford Mustang is different in different regions of the world, so we've developed two versions of the RGBWA Sequencing kit to accommodate this. The US-market Mustang has a slower blink rate, to leave time for the taillights to sequence across. The drivers with the USDM option are designed to match this slower blink rate.

EU/AU Mustangs have a standard blink rate, so the sequencing is faster to accommodate this. Works correctly, with no surprises. In 2014, Diode Dynamics was the first to make replacement multicolor circuit boards. Our goal is to make them work just like the factory system - except for that fact that you can change the color anytime, you'd like! That means connecting to the factory DRL and running light signals for proper operation.

This isn't as easy as it sounds - on the Ford Mustang, all functions are powered through the vehicle's computer, rather than traditional relays. If the vehicle doesn't see the power draw it expects, it disables the signal. Many of our competitors skip the factory signals, instructing customers to connect power to the battery, and manually turn the LEDs off and on every time they're used.

Unlike strips or halos, replacement boards work in conjunction with factory optics in your headlight. Since the factory setup uses only one white chip, it can be difficult to align the light properly from all four replacement emitters (Red, Green, Blue, and White). Ost, other brands often use low-cost generic chips, which cannot focus light properly. This creates odd appearances, as some sections are brighter than others, and mixed colors like yellow and purple don't match. Diode Dynamics uses high-intensity automotive emitters to direct light properly to the factory optic, and all designs are tested a number of times with small adjustments to make sure the setup is optimized.

Even a 0.1mm change can make a big difference, and Diode Dynamics products are carefully tuned for maximum performance. To drive the high-power LEDs safely, a constant-current, waterproof, inductive driver is included for each set.

These drivers were designed to last the life of your vehicle, and have been subjected to advanced transient voltage testing. These tests replicate the electrical wear and tear experienced in automotive environments every time your alternator starts and stops, which is what kills less robust electronics over time. The entire kit is also tested for long-term operation from -40 to 185 degrees F, vibration, and corrosion.

All of these tests are completed to SAE/DOT standards, just like the factory components. Adds RGBW multicolor and sequencing turn signal function to DRLs. Two Epistar LEDs in place of each original white chip. Smartphone control with optional Bluetooth Controller.

Engineered and manufactured in USA. What's Included in the box.

Two (2) sets LED boards, left and right. One (1) RGBW Extension wire. Quantity: Pair (Left and Right Side). Note: These boards are not compatible with aftermarket (non-factory) headlamps.

Electrical Compatibility: No electrical issues (tested and confirmed). DRL Function: Operates at full brightness for DRL.

Operating Temperature: -40C to 85C (-40F to 185F). Connector(s): JST 5-pin Input (+GRBW), T-Tap Inputs. Driver Features: External, Waterproof, Constant Current. Driver Dimensions: 2.5" x 1.38" x 0.88. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Lighting & Lamps\Light Bulbs & LEDs".

The seller is "great_deals_dfw" and is located in this country: US. This item can be shipped to United States.


2018 2020 Ford Mustang Multicolor Drl Led Boards (rgbw)